AMPTR-35

Pup Trailer

Amrep’s trailers are designed to meet your short haul multiple bin pickup & delivery needs. Amrep’s trailers will reduce your fleet size by maximizing efficiency. Amrep’s pup trailers are designed with the ability to pick up and dump containers on both the roll-off unit and trailer without the need to disconnect the trailer. Purchased in conjunction with an Amrep roll-off unit, all Amrep dumping trailers can be fully operated from the Amrep standard cab control console.

Standard Specifications
  • Type
    • Reeving unit, full tilt frame roll-off chassis
  • Rated Capacity
    • 120,000# cylinder capacity, 60,000# hoist
  • Container Capacity
    • Up to 24” (larger available)
  • Rail Size
    • Rectangular tubing 12” x 4” x 3/8” length – approximately 26’
  • Rail Width
    • Standard spacing is 34”
  • Frame
    • 3/8 T-1 x 11' channel
  • Tilt Angle
    • 46 degrees (approximate)
  • Axles / Hubs
    • 20,000 lb rating hub piloted
  • Suspension
    • Hutch 9700 - 3 spring suspension
  • Tongue
    • 14' length, 8 x 8 x 1/2" square tube, integral with chassis
  • Estimated Body Weight
    • 12,000 lbs
  • Hoist Cylinder Mounts
    • Lower shaft – 3-½”
    • Upper shaft – 2-½”
  • Hoist Cylinders
    • (2) Single stage, double acting
    • Length – 77-½”/ diameter – 6” O.D.
    • Bore – 5-½” / stroke – 62-5/8”
    • Rod – 3” chrome
    • Material – D.O.M. tubing
  • Reeving Cylinders
    • Single stage, double acting
    • Length – 97-½” / diameter – 6-½”
    • Bore – 6” / stroke – 83-5/8”
    • Rod – 3” chrome
    • Material – D.O.M. tubing
  • Rear Bumper
    • Rear bumper with tail, stop, back up lights and mud flaps
  • Hinge Pin
    • 2”
  • Fenders
    • Full composite - minimizer
  • Cable Pulley
    • 9” diameter with bronze bushings
  • Rollers
    • (3) on each rail, 4 1/2” diameter with zerk fittings
  • Cable
    • Standard 7/8" x 75' with pear ring end
  • Tool Box
    • Steel lockable 36" curbside
  • Controls
    • Air / hydraulic twin-stick
  • Control Valve
    • Commercial A-35
  • Operating Pressure
    • 1,800 psi
  • Paint
    • Glossy black
Roll-Off Options
  • Fenders
    • 1/4 steel (painted)
    • 1/4 stainless (polished)
    • Full steel (painted)
    • Full aluminum (polished)
  • Tool Box
    • Aluminum t-handle 
    • Tarp/carry basket attatached to tool box
  • Tie Downs
    • Rachet, hook for tie down at rear
    • DOT chains
  • Rail Options
    • Additional rollers
    • Angle between rollers
    • Channel rails
  • Fire Protection
    • 20 lb fire extinguisher mounted externally
  • Lighting
    • LED lighting package
  • Tapping System
Resources